HotGearProject(Obsolete)
  • Obsolete Document
    • 1.Introduction
    • 2.Author/Creator
    • 3.Parameter Explorer
      • 3.1 How to get Elements Data
      • 3.2 Interface (Filter Tab)
      • 3.3 Interface (DataTable Tab)
      • 3.4 Interface (Log Tab)
      • 3.5 Interface (Excel Input)
      • 3.6 Special Parameter
      • 3.7.Known Issue / FAQ
    • 4. Parameter Manager
      • 4.1 Document Bindings
      • 4.2 Editor
    • 5. Element Tracker
    • 6. Family Extractor
    • 7. Level Convertor
    • 8. Tag Alignment
    • 9. ToolBox
    • Obsolete Addin
      • 4.Element Merger
      • 5.Wall Join Controller
      • 6.Family Extractor
      • 7.3D Section Box
      • 8.Auto Elevation by Room/Space
      • 9.Sheet Manager
        • 9.1.View Placement
        • 9.2.Tag Alignment
        • 9.3.Tag Elbow Length
        • 9.4.UnHide Elements On View
        • 9.5.Match Rotation
        • 9.6.Reset Current View Elements Overrides
        • 9.7.Reset Current View Category Overrides
        • 9.8.Remove Selected Elements Paint
        • 9.9.Align Command
Powered by GitBook
On this page
  • Step
  • Setting
  1. Obsolete Document
  2. Obsolete Addin

8.Auto Elevation by Room/Space

Latest Version 1.0

Previous7.3D Section BoxNext9.Sheet Manager

Last updated 6 years ago

Description

This Add-on can Automatically set up the section by Room/Space boundary

Step

1.Open the Hot Gear tab beside the Add-Ins tab.

2.Click the icon on the Ribbon to start the program.

3.Start this function it will check the current Revit selection is Room or Space.

If the current Revit selection is Room or Space it will process.

4.The Section will Auto Create along the Room or Space.

Setting

Ignore Tolerance : If the Section Length is less than e.g. 800mm it will ignore the section.

Offset : section view Offset distance

Left side

Right side

Bottom side

Topside

Deep - How much distance deep from the boundary.

Back - How much distance far from the boundary.